KOOL SEAL INC -- 63-300, WHITE ELASTOMERIC ROOF COATING  -- 8030-00N029529
<pre>=====================  Product Identification  =====================

Product ID:63-300, WHITE ELASTOMERIC ROOF COATING
MSDS Date:02/14/1989
FSC:8030
NIIN:00N029529
=== Responsible Party ===
Company Name:KOOL SEAL INC
Address:1499 ENTERPRISE PARKWAY
City:TWINSBURG
State:OH
ZIP:44087
Country:US
Info Phone Num:216-425-4717
Emergency Phone Num:216-425-4717
CAGE:23820
=== Contractor Identification ===
Company Name:KOOL SEAL INC
Address:1499 ENTERPRISE PARKWAY
Box:City:TWINSBURG
State:OH
ZIP:44087
Country:US
Phone:216-425-4717
CAGE:23820

=============  Composition/Information on Ingredients  =============

Ingred Name:AMMONIA  (SARA III). VP: >55 @ 10F
CAS:7664-41-7
RTECS #:BO0875000
Fraction by Wt: 0.03%
OSHA PEL:50 PPM
ACGIH TLV:25 PPM/35 STEL; 9293
EPA Rpt Qty:100 LBS
DOT Rpt Qty:100 LBS

Ingred Name:ETHYLENE GLYCOL  (SARA III)
CAS:107-21-1
RTECS #:KW2975000
Fraction by Wt: 1.6%
OSHA PEL:50 PPM, C
ACGIH TLV:50 PPM, VAPOR, C
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:SKIN: PROLONGED OR REPEATED CONTACT
    MAY CAUSE SLIGHT IRRITATION TO SENSITIVE SKIN. EYE:CONTACT MAY
    CAUSE IRRITATION.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:VAPOR MAY AGGRAVATE SENSITIVE
    TISSUE IN NASAL & RESPIRATORY PASSAGES.

=======================  First Aid Measures  =======================

First Aid:SKIN:WASH W/SOAP & WATER. EYE:FLUSH W/LARGE AMOUNTS OF WATER
    FOR AT LEAST 15 MINS. SEE MD. INGEST:GIVE 2 GLASSES OF WATER TO
    DILUTE. DO NOT INDUCE VOMITING. CONSULT MD. TREAT SYMPTOMATICALLY.
    INHAL:RE MOVE TO FRESH AIR. SUPPORT BREATHING (GIVE O2/ARTIFICIAL
    RESPIRATION) .

=====================  Fire Fighting Measures  =====================

Flash Point:NONE
Extinguishing Media:FOAM, "ALCOHOL FOAM", CO2, DRY CHEMICAL & WATER
    FOG.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
    PROTECTIVE EQUIPMENT . IF WATER IS USED, FOG NOZZLES ARE
    PREFERABLE.
Unusual Fire/Explosion Hazard:CLOSED CONTAINER MAY EXPLODE WHEN EXPOSED
    TO EXTREME HEAT. WATER MAY BE USED TO COOL UNRUPTURED CONTAINERS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:CONTAIN SPILL W/INERT MATERIAL (SAND, EARTH,
    ETC) AND TRANSFER TO CONTAINER FOR PROPER DISPOSAL. FLOORS MAY BE
    SLIPPERY, CARE SHOULD BE EXERCISED TO AVOID FALLS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP FROM FREEZING. KEEP CLOSURE TIGHT
    & CONTAINER UPRIGHT TO PREVENT LEAKAGE.
Other Precautions:KEEP OUT OF REACH OF CHILDREN.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE REQUIRED. NIOSH/MSHA APPROVED RESPIRATOR
    APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:GENERAL ROOM VENTILATION SHOULD BE PROVIDED TO KEEP AIR
    CONTAINMENT LEVELS BELOW OSHA PEL.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEM WORK GOGGS/FULL LENGTH FSHLD 
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:WASH CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

HCC:N1
Boiling Pt:B.P. Text:212F,100C
Vapor Pres:SEE INGRED
Vapor Density:HVR/AIR
Evaporation Rate &amp; Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:47.38

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NOT APPLICABLE.
Stability Condition to Avoid:NONE.
Hazardous Decomposition Products:MAY PRDCE FUMES WHEN DRIED FILM IS
    HEATED TO DECOMPOSITION, AS IN WELDING. FUMES MAY CONTAIN CO & CO2.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF SPILLED MATERIAL IN ACCORDANCE W/
    FEDERAL, STATE & LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.